Macintosh: Application / Utilities / Logitech Unifying Software.Windows: Start > Programs > Logitech > Unifying > Logitech Unifying Software.NOTE: If you don't already have it installed, you can download Unifying software from the Software Downloads page. You can check which other mice are Flow-enabled here.You can use Logitech Unifying software to connect your keyboard or mouse to your computer. You must install Logitech Options+ software on both computers and follow these instructions. You can even copy and paste between computers. MX Keys S keyboard will follow the mouse and switch computers simultaneously. You can use the mouse cursor to move from one computer to another. With a Flow-enabled Logitech mouse, such as MX Master 3S, you can work and type on various computers with the same mouse and keyboard using Logitech Flow technology. You can work on multiple computers with your MX Keys S keyboard. NOTE: By default, the keyboard has direct access to Media Keys. We’ve added a notification to let you know you’ve swapped. Press Fn + Esc to swap between Media keys and F-Keys. When your keyboard reaches 10% of battery left, backlighting turns OFF and you get a battery notification on the screen. You will see this notification when you try to turn backlighting ON. This will also allow you to use it longer with backlight in low-light conditions. When the environment around you is too bright, your keyboard will automatically disable backlighting to avoid using it when unnecessary. If you want the backlight back, plug in your keyboard to charge. When your keyboard has only 10% of the battery left when you try to enable backlighting, this message will appear. There are two factors that will disable backlighting: Install Logitech Options+ software to get the most out of your keyboard.Ĭhange the backlight level and to know in real-time what level you have. You can always go back to the default settings by clicking the reset button. Use the Automatic Brightness slider to change to manual mode and adjust to your preferred level of brightness. Use the Backlighting Duration slider to adjust it to your preferred duration: You can customize the backlighting in your MX Keys S using Options+: You can change the backlight levels at any time, with two exceptions: the backlight cannot be turned ON when the room brightness is high, or the keyboard battery is low.īacklight customization using Logi Options+ Your keyboard has an embedded ambient light sensor that reads and adapts the level of backlighting accordingly. You can continue typing while it is charging. Plug the USB-C cable at the top right corner of your keyboard. You can continue typing for more than 500 hours without backlighting when the battery is low. Your keyboard will let you know when it is running low. If you are a macOS or iOS user, the special characters and keys will be on the left side of the keys: If you are a Windows, Linux, and Android user, the special characters will be on the right side of the key: Your keyboard is compatible with multiple operating systems (OS): Windows 10,11 or later, macOS 11 or later, iOS, Linux, Chrome OS, and Android. Logitech Options+ is compatible with Windows and Mac. To download and learn more about the possibilities, go to /optionsplus. Once paired, a short press on the Easy-Switch button will allow you to switch channels.ĭownload Logitech Options+ to use all the possibilities this keyboard has to offer.USB receiver: Plug the Logi Bolt receiver into a USB port, open Logitech Options+, select: Add devices > select Logi Bolt receiver, and follow the instructions.Bluetooth: Open the Bluetooth settings on your computer to complete the pairing.Connect your keyboard to your computer using Bluetooth or the USB receiver:.This will put the keyboard in discoverable mode so that it can be seen by your computer. Select the channel you want and press and hold the Easy-Switch button for three seconds.Your keyboard can be paired with up to three different computers using the Easy-Switch button to change the channel. Pair to a second computer with Easy-Switch To download and learn more go to /optionsplus.ĥ - Battery status LED and ambient light sensor If you experience issues with Bluetooth, click here for Bluetooth troubleshooting.ĭownload Logitech Options+ to enable additional features. Open the Bluetooth settings on your computer to complete the pairing.Ĭlick here for more details on how to do this on your computer. Plug the receiver into a USB port on your computer. Use the included Logi BOLT wireless receiver.NOTE: If the LED is not blinking quickly, perform a long press (three seconds). The number 1 LED on the keyboard should blink quickly. For quick interactive setup instructions, go to the interactive setup guide.įor more detailed information, continue with the following detailed setup guide.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |